Metal Curtain Rods

Shopping for Metal Curtain Rods in two easy steps.

  1. Scroll down this page to select a Curtain rod end-piece (finial) from the selection below that is suitable for you.
  2. Select a colour and then use the pricing box on the right hand side to get an instant quote.
Curtain Rods- Handy Tip!
The finial or End that goes on the end of the rod is extra to the length that you record in the pricing box.


Metal Curtain Rods

Rods & Blinds Direct is proud to introduce the Elements range of metal curtain rods which has been designed and manufactured right here in New Zealand for our own unique requirements and is strong enough to handle any weight of curtains.

The Curtain rod itself is a high tensile metal extrusion which has a built-in track at the back where the gliders can run from one side to the other without any interference from the brackets. Each length is custom cut to your requirements and we can manufacture and deliver curtain rods right up to 5.8 metres in length. All our Elements range of rods are powder coated in the latest colours to co-ordinate with your decor.

Our curtain rods are sold as kits- which includes the rod, brackets to attach it to the wall, your choice of finials, gliders which are set into the rod for you ,we even provide fixing screws - there is nothing further that you will need.
Each of our curtain rods is carefully inspected and checked before packing so it arrives to you in perfect order to give years of trouble free service.

Buy with confidence as all our metal curtain rod kits come with a full five year warranty. Should you have any queries please don't hesitate to contact us - we welcome your enquiry.
Rod Diameter 28 mm

Maximum Length 5800 mm

Rod composition: High tensile aluminium.
Five Year Warranty

Rods and blinds offer a five year warranty on all our metal curtain rods.
Each rod is carefully inspected and tested before it leaves our factory so when it is installed in your home it will give years of trouble free service.
Remember when you have installed your curtain rods to fill in your warranty form on our website. There is a link to the warranty page below:

Warranty Form

Please also refer to the about us page, for further information on rods and blinds.
  • Can I order over the phone?

    Rods and Blinds are always happy to help you place your order over the phone, especially if you need some expert advice about the products before you buy. Just call us on 0800 763 748 and speak to one of our trained advisors

  • How do I measure for curtain rods & tracks?

    Measuring an Existing Rod or Track
    If you have an existing curtain track or curtain rod all you will need to do is measure the total length, excluding the finials (this will give you the total length you require to start shopping.

    Step by Step Measuring for New Tracks & Rods.
    • Step 1 - Start by measuring the recess width of the window, shown as (A) and note this measurement down.
    • Step 2 - Now measure each side of the window recess (B) this measurement is usually 150 mm to 350mm on either side to enable the curtains to be pulled back away from the window to not restrict the daylight, again note these measurements down. A good rule of thumb guide - for a 2000mm window or recess you should have at least 200 mm each side of the window, for a 3000 mm window or recess you should have at least 300 mm each side of the window. In both examples if you are using heavy fabrics allow extra again.
    • Step 3 - Add these three measurements together and this will give you the pole or track length you require. Example; B + A + C = Length required.

    How do I measure for curtain rods & tracks?

    Now you have the length you require you can start shopping.

    NOTE: The Rod lengths do not include the finials. The finials lengths are shown in the specification tab under each individual finial.

    Handy Hints
    • All our custom tracks & rods are manufactured to your exact measurements.
    • When taking measurements its best to get someone to hold the other end of the tape as even metal tape measures will flop over when extended.
    • All the measurements of our tracks and poles are in millimetres (mm).
    • If space is limited either side of the window a smaller finial would be best suited. Finial lengths are given in the finial section under the specification tab. Remember to measure twice cut once.

    Please feel free to contact us by using our toll free number if you are unsure on any of the above points.