Metal Rods for Eyelet or Tab Top curtains
Shopping for Eyelet or Tab Curtain Rods in two easy steps.
(1) Scroll down this page to select a Curtain rod end-piece (finial) from the selection below that is suitable for you.
(2) Select a colour and then use the pricing box on the right hand side to get an instant quote.
Our Eyelet rod range is designed specifically for using with Eyelet or Tab Top curtains. Instead of plastic gliders to attach the curtain to the rod , the rod itself is threaded through the eyelets or tabs. This purpose built rod is one of the strongest rods available on the New Zealand market, with extra support built into the rod itself.
Rod Diameter 28 mm
Maximum length 4000mm
Maximum length 4000mm
Warranty
Rods and blinds are proud to offer a full five year warranty on all our curtain rod sets.
Remember when you have installed your roller blinds to fill in your warranty form on our website. There is a link to the warranty page below:
Warranty Form
Please also read the about us page, for further information on our company.
- Can I order over the phone?
Rods and Blinds are always happy to help you place your order over the phone, especially if you need some expert advice about the products before you buy. Just call us on 0800 763 748 and speak to one of our trained advisors
- How do I measure for curtain rods & tracks?
Measuring an Existing Rod or Track
If you have an existing curtain track or curtain rod all you will need to do is measure the total length, excluding the finials (this will give you the total length you require to start shopping.
Step by Step Measuring for New Tracks & Rods.
- Step 1 - Start by measuring the recess width of the window, shown as (A) and note this measurement down.
- Step 2 - Now measure each side of the window recess (B) this measurement is usually 150 mm to 350mm on either side to enable the curtains to be pulled back away from the window to not restrict the daylight, again note these measurements down. A good rule of thumb guide - for a 2000mm window or recess you should have at least 200 mm each side of the window, for a 3000 mm window or recess you should have at least 300 mm each side of the window. In both examples if you are using heavy fabrics allow extra again.
- Step 3 - Add these three measurements together and this will give you the pole or track length you require. Example; B + A + C = Length required.
Now you have the length you require you can start shopping.
NOTE: The Rod lengths do not include the finials. The finials lengths are shown in the specification tab under each individual finial.
Handy Hints
- All our custom tracks & rods are manufactured to your exact measurements.
- When taking measurements its best to get someone to hold the other end of the tape as even metal tape measures will flop over when extended.
- All the measurements of our tracks and poles are in millimetres (mm).
- If space is limited either side of the window a smaller finial would be best suited. Finial lengths are given in the finial section under the specification tab. Remember to measure twice cut once.
Please feel free to contact us by using our toll free number if you are unsure on any of the above points. - Step 1 - Start by measuring the recess width of the window, shown as (A) and note this measurement down.
Back...
